Instruction Book
9829 2115 69 62
• The screen shows the list of all settings.
• Press the Enter button (1); a red selection bar is covering the first item
(Automatic restart). Use the [ key of the Scroll keys to select the setting to be
modified and press the Enter key.
• A pop-up screen appears. Use the | or J, key to select the required parameter and press
the Enter key to confirm.
Access key
Different security levels are programmed in the regulator (e.g. user, service technician, etc).
This menu item is used to change the security level. Scroll to the correct icon using the scroll
key. Press the enter button. Press the enter button again to modify the security level. Press the
enter button again, a pop-up menu appears. Use the scroll keys to enter the password of the
new security level. press the enter key to confirm the change.
User password
If the password option is activated, it is impossible for unauthorized persons to modify any
setting.
• Using the Scroll keys, move the cursor to the Password icon.
• Press the Enter key.
• Select the Modify button using the Scroll keys and press the Enter key. Next, modify
the password as required.
To Next Page
Loading...