Technical Data
Weight Length Depth
Width over
handles Sound level Vibration level
lb in in in (Acc. to ISO 3744) (Acc. to ISO 8662)
55 36.48 13.02 24.04 109 dB 2.3m/s
2
Model Tool Shank Part number
in
Cobra mk1 1 1/4” x 6” 8318 0700 03
Cobra mk1 1 1/8” x 6” 8318 0700 07
Capacity
Impact energy Impact rate
foot pounds bpm
40-44 (at 1440 bpm) 720-1440
Engine
Type Power Cooling system Starter system
Recommended
fuel Oil type Oil mix Fuel capacity Fuel consumption
90 cc single cylinder
two-stroke
2.7 hp
(at 5800 rpm)
Fan cooled Recoil starter gas, 90-100 octane
leaded or unleaded
Atlas Copco two-
stroke oil or similar
2% (1:50) 0.26 US gallon 0.34 US gallon/hour
Vibro-reduction
The patented vibration-
dampening system features
leaf springs rather than
rubber bushings or
spiral springs.
Easy to start
With a decompression valve
and electronic ignition, the
Cobra mk1 is easy to start.
Ships complete with
Chuck and shank templates,
replacement spark plug and
starter rope, 1 liter oil, owner's,
spare parts and safety manuals,
and CE declaration.
Low emissions
The Cobra mk1 meets tough
emission requirements, and has
been EPA 1-approved.
Hand and arm protection
Atlas Copco’s unique Hand and Arm
Protection System (HAPS) reduces the
negative effects of harmful vibrations.
Long lifetime
The high capacity air filter
ensures a long working
lifetime, even when large
quantities of dust and airborne
particles are present. It’s easy
to get to the air filter for quick
and easy servicing.
Low noise
An effective silencer ensures
that the Cobra mk1 meets
the current European Noise
Emission Directive (NED).
Easy to transport
The Cobra mk1 weighs just 55 pounds and fits easily
into car trunks. A wooden transport box is available.
To Next Page
Loading...
Need help?
General
