1. Menu 2. Regulation1. Menu 2. Regulation
▪ Use the Scroll keys to move the cursor to the Counters icon (refer to Menu
icon).
▪ Push the Enter key. The screen that follows is shown:
1. Counters 2. Running Hours
3. Motor Starts 4. Load Relay
5. VSD 1-20 % RPM*
1. Counters 2. Running Hours
3. Motor Starts 4. Load Relay
5. VSD 1-20 % RPM*
* In % (the percentage of the time that the motor speed was between 1 and
20%).
▪ The screen shows a list of all counters with their readings.
4.9. Control mode selection
Function
To select the control mode for the pump. The control modes are as follows:
▪ Local control
▪ Remote control
▪ Local Area Network (LAN) control
07/2021 - ©
Atlas CopcoPage 431950840208_A
Elektronikon® graphic controller