1. Week Timer 2. Week Action Schemes
3. Week Cycle 4. Status
5. Remaining Running Time
1. Week Timer 2. Week Action Schemes
3. Week Cycle 4. Status
5. Remaining Running Time
▪ Push the Escape key to go to the main Week Timer menu.
▪ Select the Remaining Running Time from the list.
▪ Push the Enter key to change the value.
1. Week Timer 2. Week Action Schemes
3. Week Cycle 4. Status
5. Remaining Running Time
1. Week Timer 2. Week Action Schemes
3. Week Cycle 4. Status
5. Remaining Running Time
▪ This timer is used when the week timer is set and the pump must continue to
operate (for example, 1 hour).
▪ This timer is before the Week Timer action.
Elektronikon® graphic controller
07/2021 - ©Atlas CopcoPage 641950840208_A
To Next Page
Loading...
