Product information EN ETD STR61-70-13
8
© Atlas Copco Industrial Technique AB - 9839 0180 01
User memory
Apart from the tool information in the EPC memory, the RFID chip also contains a 512-bit user memory,
available for the customer to add any additional information.
Service overview
Service recommendations
Preventive maintenance is recommended at regular intervals. See the detailed information on preventive
maintenance. If the product is not working properly, take it out of service and inspect it.
If no detailed information about preventive maintenance is included, follow these general guidelines:
■
Clean appropriate parts accurately
■
Replace any defective or worn parts
To Next Page
Loading...
