ETP STB33-12-10B EN Installation
© Atlas Copco Industrial Technique AB - 9836 8170 01
5
Installation
Installation Requirements
Installation
For installation guideline, see Power Focus 6000 Configuration manual.
Installation Instructions
Battery Pack
Attaching and Removing the Battery Pack
1. Attach the battery pack to the tool and make sure that it is fastened correctly. The battery pack can
be attached pointing forward or backward to get the best accessibility and balance.
2. To remove the battery pack, press the button on the battery and push it out.
Since a battery pack slowly discharge itself, keep the battery pack in the charging unit that provides a
trickle charge.
To Next Page
Loading...
