ETP STB33-12-10B EN Operation
© Atlas Copco Industrial Technique AB - 9836 8170 01
7
Tightening
As tightening torque increase the reaction force build up equally. Make sure that the tool is in correct work-
ing order and that the controller is correctly programmed. By doing this you avoid unexpected behavior
from the tool, which may result in operator injury.
Rotation Direction for the Tightening
Check that the tool is in the correct running direction by turning the reverse button or reverse ring :
Pistol Grip Models
■
Press in the reverse switch on the right hand side of the tool, to set the direction clockwise (CW).
■
Press in the reverse switch on the left hand side of the tool, to set the direction counter clockwise
(CCW).
Angle Models
■
Turn the reverse ring to the right, to set the direction clockwise (CW).
■
Turn the reverse ring to the left, to set the direction counter clockwise (CCW).
Soft Start
The soft start function facilitates the screwhead and thread to reach the snug level. The duration of the
soft start is adjustable.
For further information about tightening, see Power Focus 6000 Configuration manual.
To Next Page
Loading...
