ETV ST101-270-20 EN Service
© Atlas Copco Industrial Technique AB - 9839 1678 01
13
Lubrication instructions
Lubricating guide
Brand Cable nut Gears
Molycote BR2 Plus
CRC Litium grease No. 3020
Brand Angle gears General purpose
Molycote Longterm 2 plus
Almagard LE 3751
Lubrication
Planetary gears, needle bearings and ball bearings must be lubricated with soft grease containing molyb-
denumdisulphide at the regular overhaul of the tool.
Repair instructions
Repair
Repair must only be carried out by qualified authorised personnel. For further information contact your lo-
cal Atlas Copco sales representative.
To Next Page
Loading...
