Instruction book
6996 0227 40 35
Function
To select the control mode, i.e. whether the vacuum pump is in local control, remote control or controlled
via a local area network (LAN).
Procedure
Starting from the main screen, make sure the button Menu (iv) is selected:
Next, use the scroll buttons to go to the regulation icon (ii) and press the enter button:
There are 3 possibilities:
• Local control
• Remote control
• LAN (network) control
After selecting the required regulation mode, press the enter button on the controller to confirm your
selection. The new setting is now visible on the main screen. See section Icons used for the meaning of
the icons.
To Next Page
Loading...
