Atlas Copco GHS 730 VSD+ - Page 54

Instruction book
54 6996 0227 40
 Press the Escape key on the controller to go to the main Week Timer menu. Select Remaining
Running Time from the list and press the Enter key on the controller to Modify.
(1)
Week Timer
(2)
Week Action Schemes
(3)
Week Cycle
(4)
Status
(5)
Remaining Running Time
 This timer is used when the week timer is set and for certain reasons the Vacuum pump must continue
working, for example, 1 hour, it can be set in this screen. This timer is prior to the Week Timer action.
(1)
Week Timer
(2)
Week Action Schemes
(3)
Remaining Running Time