Instruction book
6996 0224 30 69
9. Declaration of conformity
EU DECLARATION OF CONFORMITY
We, Atlas Copco Airpower n.v., declare under our sole responsibility, that the product
Machine type GVS 16A, GVS 25A, GVS 40A, GVS 60A, GVS 100A, GVS 200A, GVS 300A, GVS 470A,
GVS 630A
Serial number This declaration covers all product serial numbers from the date this Declaration was signed
onwards.
Which falls under the provisions of article 12.2 of the EC Directive 2006/42/EC on the approximation of the
laws of the Member States relating to machinery, is in conformity with the relevant Essential Health and
Safety Requirements of this directive.
The machinery complies also with the requirements of the following directives and their amendments as
indicated.
Directive on the approximation of laws of the
Member States relating to
Harmonized and/or Technical
Standards used
Electromagnetic compatibility
EN 61000-6-2 :
EN 61000-6-4 :
The harmonized and the technical standards used are identified in the attachments hereafter
Atlas Copco Airpower n.v. is authorized to compile the technical file.
Conformity of the product to
the specification and by
implication to the directives