Instruction book
44 6996 0224 30
6. In order to assemble motor and coupling housing on pump, follow step 2 in reverse order.
7. Cover the pump. Mount lifting bar on the pump.
8. Refit the drain plug. Pour recommended quantity of oil in the pump.
3.4 Electrical connections
Always use a protection system, including an overcurrent protection and an electrical disconnecting
device, between the pump and the electric power supply. Motor currents can be found on the motor
data plate. The pump is normally delivered without electrical cable and without switch. For the electrical
connection, check the diagram inside the terminal box or on the motor data plate.
Additional safety devices are available as options including an oil pump temperature switch.
To Next Page
Loading...
Need help?
General
