LSV39 SA12-125 EN Operation
© Atlas Copco Industrial Technique AB - 9839 0621 01
13
Operating Instructions
Free speed check
Do a daily free speed check with a tachometer. Always do a free speed check of the tool after ser-
vice.
This check should be done with the grinding equipment detached.
The free speed must not be more than the rated speed marked on the tool.
Operating the tool
DANGER Risk of Injury
There is a risk of injury if the tool is used without the wheel guard.
► Always use the tool with the recommended wheel guard.
► Make sure that the wheel guard is positioned correctly and not damaged.
To Next Page
Loading...
