PAGE
6
Repair Instruction No. 169.2/94
PHE 24/26/30-Range
1 Remove the air deflector plate (1).
2 Lightly hit the edge of the housing with a
plastic hammer and expel the field (3)
from the motor housing (5).
3 Remove the centering ledges (2).
4 Remove the rubber shell (4).
Removing the
field
1
4
1 2 3 4 5
It is recommended to regularly submit the tool to maintenance. Maintenance is also due if the carbon
brushes cut off or if the hammer mechanism fails. When carrying out maintenance all parts of the
maintenance set must be exchanged. Use the appropriate maintenance set for each machine:
PHE 24 R 4931 3431 92 (230 V)
PHE 26 R 4931 3432 24 (230 V)
PHE 24 RX 4931 3431 88 (230 V)
PHE 30 RX2 4931 3432 21 (230 V)
General
Maintenance
Torque
1
2
3
Position Name Torque
1 Spindle sleeve screws 6,0 Nm
2 Joining gear housing/motor housing 2,5+5 Nm
3 End shield screws 4,0 Nm
Illustration shows 2-gear machine
To Next Page
Loading...