Atlas Copco PHE 26 RA User Manual

PAGE
4
Repair Instruction No. 174.3/95
PHE 26 RA
1 2 3 4 56 7
10
8
1
2
3
45 6
11
12
1
2
3
4563
Dismantling the
back gear shaft
1 Remove the ring (8).
2 Press off the back gear wheel (7).
3 Remove the remaining parts from the back
gear shaft (1):
– tumble drive (6)
– washer (5)
– coupling box (4)
– spring (3)
– washer (2)
1 Remove the service cover (6).
2 Remove the strain relief (5).
3 Loosen the cable (4).
4 Lever off the six handle cover (Softgrip)
holders with aid of a screwdriver (see
illustration) and remove the softgrip (3)
5 Remove the screws of the handle
cover (2).
6 Remove the AVS-rubber (1).
Dismantling the
handle
1 Unhinge the tension springs (4) and put
them aside (don’t take them out!) and pull
out the carbon brushes (5).
2 Pull out the carbon brush holder (6).
3 Pull off the cable and remove the electrical
parts.
4 Remove the second handle cover (1), the
AVS-rubber (2), and the guide rollers (3).
Dismounting the
electrical parts

Atlas Copco PHE 26 RA Specifications

General

Brand	Atlas Copco
Model	PHE 26 RA
Category	Drill
Language	English