EasyManuals Logo

Atlas Copco QAS 80 - 100 Pd User Manual

Atlas Copco QAS 80 - 100 Pd
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Instruction manual
2954 2380 00 9
2.2 Bodywork
The alternator, the engine, the cooling system, etc. are enclosed in
a sound-insulated bodywork that can be opened by means of side
doors (and service plates).
To be able to lift the generator by means of a crane, open the door
in the middle of the roof to get access to the lifting beam.
To be able to lift the generator by means of a forklift, rectangular
holes are provided in the frame.
The earthing rod, connected to the generator’s earth terminal is
located at the inside of the cubicle door.
2.3 Markings
A brief description of all markings provided on the generator is
given hereafter.
2.4 Drain plugs and filler caps
The drain holes for the engine oil, the coolant and the plug for the
fuel, are located and labelled on the frame; the fuel drain plug at the
bottom of the frame cubicle side, the others at the service side.
The drain flexible for engine oil can be brought to the outside of the
generator through the drain hole.
The filler cap for the engine coolant is accessible via an opening in
the roof. The fuel filler cap is located in the side panel.
Indicates that the generator may be refuelled with
diesel fuel only.
Indicates the drain for the engine oil.
Indicates the drain for the coolant.
Indicates the drain plug for the engine fuel.
Use 15W40 oil only.
Indicates the different earthing connections on the
generator.
Indicates that the alternator should not be cleaned with
high pressurised water.
Indicates the battery switch.
Indicates that the unit may start automatically
and that the instruction book has to be
consulted prior to use.
Read the instruction manual before using the
lifting eye.
Indicates the 3-way valve.
diesel
15W40
PAROIL
Read the instruction manual before use.
Indicates the partnumbers of the different
service packs and of the engine oil.
These parts can be ordered to the factory.
The drain hole can also be used to guide external fuel
tank connections. When connecting an external
fueltank, use the 3-way valves. Refer to “External
fueltank connection (with/without quick couplings)”.
!

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Atlas Copco QAS 80 - 100 Pd and is the answer not in the manual?

Atlas Copco QAS 80 - 100 Pd Specifications

General IconGeneral
BrandAtlas Copco
ModelQAS 80 - 100 Pd
CategoryInverter
LanguageEnglish

Related product manuals