Data plate
Construction Tools PC AB
A
B
C
p max
D
Del. wt.
Production year
xxxx
E
Type
Made in
Ser. No.
A. Machine type
B. Maximum hydraulic pressure
C. Serial number
D. The warning symbol together with the book
symbol means that the user must read the
safety and operating instructions before the
machine is used for the first time.
E. The CE symbol means that the machine is
EC-approved. See the EC Declaration of
Conformity which is delivered with the machine
for more information.
Noise level label
The label indicates the guaranteed noise level
corresponding to EC-directive 2000/14/EC. See
"Technical data" for accurate noise level.
Labels on the accumulator
Read through the overhaul instructions carefully
before servicing or charging.
The accumulator must only be charged with Nitrogen.
NOTICE Only certified personnel are allowed to
work with the accumulator.
Transport
WARNING Falling hydraulic breaker
If the hydraulic breaker tips over and fall, it may
cause serious injury.
► Place the hydraulic breaker in a safe position
where it cannot fall over and cause damage.
Lifting the hydraulic breaker
Carefully check that the carrier is stable enough when
transporting, performing maintenance, or other kinds
of work with the hydraulic breaker.
The hydraulic breaker is delivered in a box. To lift
the hydraulic breaker in a safe way, fit the lifting strap
in the manner shown in the illustration below.
Transport using a forklift
When using a forklift. Place the hydraulic breaker at
a pallet. Use wedges and strapping to secure it.
Slowly lift and transport the hydraulic breaker to its
intended destination.
Transport using a lorry
Put the hydraulic breaker on an anti-slip mat at the
lorry. Secure the machine to the loading surface with
straps.
© 2014 Construction Tools PC AB | No. 9800 0648 01l | 2014-06-11
Original instructions
12
SB 52, 102, 152, 202, 302, 302 SC, 452, 452 SC, 552Safety and operating instructions
To Next Page
Loading...
