Capacities
SB 552
SB 452
SCSB 452
SB 302
SCSB 302SB 202SB 152SB 102SB 52
65–115
(17.0-30.0)
70-100
(18.5-26.5)
55-100
(14.5-26.5)
50–80
(13.0-21.0)
50–80
(13.0-21.0)
35–65
(9.0-17.5)
25–45
(6.5-12.0)
16–35
(4.0-9.0)
12–27
(3.0-7.0)
Oil flow, l/min
(gpm)
650–1,150850-1,150550-1,250950-1,250600-1,400850–1,800850–1,900750–2,300750–1,700Impact rate,
bpm
100–150
(1,450-
2,175)
100-110
(1,450-
1,595)
100–150
(1,450-
2,175)
100–110
(1,450-
1,595)
100–150
(1,450-
2,175)
100–150
(1,450-
2,175)
100–150
(1,450-
2,175)
100–150
(1,450-
2,175)
100–150
(1,450-
2,175)
Operating
pressure, bar
(psi)
2919251520171197Maximum
hydraulic input
power, kW
18
(260)
21
(305)
21
(305)
26
(377)
26
(360)
25
(360)
25
(360)
18
(260)
25
(360)
Back pressure
acceptance,
bar (psi)
40
(580)
40
(580)
40
(580)
40
(580)
40
(580)
40
(580)
40
(580)
40
(580)
40
(580)
Accumulator
gas pressure,
bar (psi)
185
(2,683)
185
(2,683)
185
(2,683)
185
(2,683)
185
(2,683)
170
2,466)
180
(2,611)
180
(2,611)
180
(2,611)
Pressure relief
valve on
breaker,
bar (psi)
4
(58)
4
(58)
4
(58)
4
(58)
4
(58)
4
(58)
4
(58)
--Water pressure,
bar (psi)
≤9
(≤2.4)
≤9
(≤2.4)
≤9
(≤2.4)
≤9
(≤2.4)
≤9
(≤2.4)
≤5
(≤1.3)
≤5
(≤1.3)
--Water
consumption,
l/min (gpm)
2
(29)
2
(29)
2
(29)
2
(29)
2
(29)
2
(29)
2
(29)
2
(29)
2
(29)
Air pressure,
bar
(psi)
≤0.73
(≤26)
≤0.73
(≤26)
≤0.73
(≤26)
≤0.73
(≤26)
≤0.73
(≤26)
≤0.73
(≤26)
≤0.73
(≤26)
≤0.73
(≤26)
≤0.73
(≤26)
Air flow, m
3
/min
(ft
3
/min)
Noise declaration statement
SB 552
SB
452 SCSB 452
SB
302 SCSB 302SB 202SB 152SB 102SB 52
979494899190858789Sound
pressure
1
dB(A)
126122122118119118114115117Sound power
2
dB(A)
1
Sound pressure level according to EN ISO 3744 in accordance with directive 2000/14/EC at 10 metres distance.
2
Guaranteed sound power according to EN ISO 3744 in accordance with directive 2000/14/EC inclusive spread
in production.
These declared values were obtained by laboratory type testing in accordance with the stated directive or
standards and are suitable for comparison with the declared values of other tools tested in accordance with
the same directive or standards. These declared values are not adequate for use in risk assessments and
values measured in individual work places may be higher. The actual exposure values and risk of harm
experienced by an individual user are unique and depend upon the way the user works, in what material the
breaker is used, as well as upon the exposure time and the physical condition of the user, and the condition of
the breaker.
We, Construction Tools PC AB, cannot be held liable for the consequences of using the declared values, instead
of values reflecting the actual exposure, in an individual risk assessment in a work place situation over which
we have no control.
© 2014 Construction Tools PC AB | No. 9800 0648 01l | 2014-06-11
Original instructions
26
SB 52, 102, 152, 202, 302, 302 SC, 452, 452 SC, 552Safety and operating instructions
To Next Page
Loading...
