Every year
Overhauling must be done after one year of
continuous operation. Overhauling must for safety
reasons be performed by authorised personnel at an
authorised workshop.
Storage
WARNING Hydraulic breaker and working
tool are heavy
If the breaker or working tool topple over or fall down
it can result in material damage and personal injury.
► Store the hydraulic breaker and the working tool
so that falling or rolling down is prevented.
If the hydraulic breaker is not used for a long time,
the following steps have to be considered to protect
the hydraulic breaker from corrosion:
1. Clean the hydraulic breaker carefully.
2. Dismount the working tool and lubricate the front
part of the piston, bushing and the tool retainer
lock.
3. Store the hydraulic breaker in a dry place.
Disposal
A used machine must be treated and scrapped in
such a way that the greatest possible portion of the
material can be recycled and any negative influence
on the environment is kept as low as possible.
Before a used machine is scrapped it must be
emptied and cleaned from all hydraulic oil. The
remaining hydraulic oil must be deposited and any
negative influence on the environment is to be kept
as low as possible.
© 2014 Construction Tools PC AB | No. 9800 0648 01l | 2014-06-11
Original instructions
22
SB 52, 102, 152, 202, 302, 302 SC, 452, 452 SC, 552Safety and operating instructions
To Next Page
Loading...
