EasyManua.ls Logo

Atlas Copco SF 2

Atlas Copco SF 2
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4.5 Taking out of operation
Procedure
1. Stop the compressor and close the air outlet valve.
2. Switch off the voltage and disconnect the compressor from the mains.
3. Depressurise the compressor.
On compressors with refrigerant dryer and on compressors with an air receiver, open the manual drain
valve(s) (Dm / Dm1).
4. If provided, shut off and depressurize the part of the air net which is connected to the outlet valve.
Disconnect the compressor from the air net.
5. If provided, disconnect the compressor condensate piping from the local condensate drain system.
Instruction book
26 2920 7110 11

Related product manuals