Atlas Copco XAS 185 CD7 T4F HOP User Manual

Engine C2.2T
XAS 185 CD7 T4F HOP
Instruction Manual for AC Compressors
English
•
Always start and operate the engine in a well-ventilated area.
• If in an enclosed area, vent the exhaust to the outside.
• Do not modify or tamper with the exhaust system.
• Do not idle the engine except as necessary.
For more information go to www.P65warnings.ca.gov/diesel.
CALIFORNIA Proposition 65
WARNING
Breathing diesel engine exhaust exposes you to chemicals known to
the State of California to cause cancer and birth defects or other
reproductive harm.

Atlas Copco XAS 185 CD7 T4F HOP Specifications

General

Brand	Atlas Copco
Model	XAS 185 CD7 T4F HOP
Category	Air Compressor
Language	English

Summary

Safety Precautions for Portable Compressors

General Safety Precautions

Lists general safety precautions for operating and maintaining Atlas Copco equipment.

Leading Particulars

General Description of the Compressor

System Overview

Compressor Regulating System

Details the compressor regulating system under load condition.

Air Flow

Oil System Description

Explains the compressor's oil system, including oil circulation and filtration.

Continuous Regulating System

Explains the continuous regulating system and its control mechanisms.

Operating Instructions

Parking, Towing, and Lifting Procedures

Provides instructions for parking, towing, and lifting the compressor unit.

Parking Instructions

Towing Instructions

Instructions for safely towing the compressor, including vehicle matching and safety chains.

Lifting Instructions

Procedures for safely lifting the compressor using the designated lifting points.

Before Starting Procedures

Starting and Stopping

Safety Precautions for Starting/Stopping

Critical safety warnings regarding power supply and controller operation.

Battery Switch Operation

Guidelines for using the battery switch to prevent control unit damage.

Control Panel Functions

Automatic Functions

Control Panel Views

Main View

Setup View

Measuring View

Alarm View

Displays active and historical alarm information for the compressor.

Starting the Compressor

Stopping the Compressor

Shutdown Procedures

Power Off Procedure

Diesel Particulate Filter Regeneration

Automatic DPF Regeneration (Default)

Details automatic DPF regeneration triggered by soot load conditions.

Inhibit DPF Regeneration

Increasing Soot Load

Turning Regeneration Back to Auto

Force DPF Regeneration

Instructions to manually initiate a DPF regeneration process.

Service Regeneration

Function Configuration

Set Auto Load Function

Auto Start/Auto Stop Configuration

Fault Codes and Alarms

Emergency Stop Procedure

Maintenance

Use of Service Paks

Preventive Maintenance Schedule

Engine Preventative Maintenance

Schedule for engine maintenance tasks like oil and filter changes.

Air Filter Service

Compressor Service

Oil Specifications

Lubrication Oils Recommended

Oil Level Check

Engine Oil and Filter Change

Compressor Oil and Filter Change

Adjustments and Servicing Procedures

Adjustment of Continuous Regulating System

Procedure for adjusting the continuous regulating system pressure.

Air Filter Engine/Compressor

Cleaning the Dust Trap

Replacing the Air Filter Element

Step-by-step guide for replacing the air filter element.

Air Filter Maintenance

Problem Solving

Problem Solving Chart

Troubleshooting guide for common compressor operational issues.

Alternator Precautions

Technical Specifications

Torque Values

Recommended torque values for various assemblies and fasteners.

Compressor/Engine Specifications

Reference Conditions

Operating Limitations

Performance Data

Engine Specifications

Unit Specifications

Compressor Design Data