Atlas Copco XRYS 577 - Air Receiver; Safety Valve

- 100 -
AIR RECEIVER
The air receiver (1) is tested according to official
standards. Carry out regular inspections in conformity
with local regulations.
SAFETY VALVE
Following checks must be carried out:
• A check of the opening of the lifting gear, twice a
year.
This can be done by screwing the cap of the valve
anti-clockwise.
• An annual check of the set pressure according to
local regulations. This check cannot be done on
the compressor and must be carried out on a
proper test bench.
Daily drain condensate.
(2)
(1)
All adjustments or repairs are to be done
by an authorized representative of the
safety valve (2) supplier, see section
Specific safety precautions.