Need help?Do you have a question about the Atlas Copco XRHS 527 Cd C3 WUX and is the answer not in the manual?
General| Model | XRHS 527 Cd C3 WUX |
|---|---|
| Voltage | 24 V |
| Free Air Delivery | 27.0 m³/min |
| Working Pressure | 7 bar |
| Power | 302 kW |
| Weight | 14100 lb |
| Engine Power | 132 kW |
| Drive Type | Diesel |
Essential safety rules for operating and maintaining the compressor unit.
Guidelines for safely moving and setting up the compressor unit.
Critical safety measures for operating the compressor under various conditions.
Safety protocols for performing maintenance or repairs on the compressor.
Detailed safety guidelines for batteries, pressure vessels, and safety valves.
General safety and procedures for moving and lifting the compressor unit.
Essential checks to perform before initial startup or after a long standstill.
Critical safety rules to follow before starting or stopping the compressor.
Explanation of the buttons and functions on the compressor's control panel.
Steps for powering up, initializing the controller, and pre-start checks.
The process of preparing the engine, preheating, and warming up for operation.
Steps and display indicators during the compressor loading process.
Steps for stopping the compressor, including engine cooling down.
Actions taken during critical alarms or emergency stops leading to shutdown.
Steps for safely powering down the controller and switching off the battery.
How the system automatically performs DPF regeneration based on soot load.
Procedures to manually disable or force DPF regeneration.
Alerts and required responses when soot load reaches critical levels.
Essential safety precautions to observe before performing any maintenance tasks.
Table outlining routine maintenance tasks and intervals for the compressor.
Recommends Atlas Copco branded oils for compressor, specifying types and grades.
Details on approved PAROIL engine oils, including synthetic and mineral types.
Procedure for checking and topping up the engine oil level.
How to check the compressor oil level using the gauge.
Detailed steps for changing the compressor oil and oil filters.
Troubleshooting guide for low compressor capacity or pressure problems.
Diagnosing and resolving issues causing unit stops, overheating, or filter mist.
Data on engine speed, fuel consumption, and delivery rates at various loads.
To Next Page