Atlas Kwik Bay Quick Start Guide

• If one (but not both) of the blue lock bars should engage before the
lift reaches the ground, (platforms will become unlevel) then damage to
the lift frame may occur.
• If the operator does NOT WANT TO LOWER THE VEHICLE ALL
THE WAY TO THE GROUND, (perhaps only a few inches from the
current raised position), then the operator must make sure that both of
the Blue Safety Lock Bars are fully disengaged during the lowering
process. After pressing the DOWN button on the remote console, the
platforms begin to move up and the lock bars release (disengage). As
the lift platforms descend to the desired lower locking position (lock
bars are disengaged), the operator should make sure that when the
desired position is reached that both lock bars fully engage the frames
horizontal Silver Safety Lock Bars at the same time and at the same
position so that the platforms remain LEVEL. Click HERE to see the Kwik Bay Lift and locking system in action.

Atlas Kwik Bay Specifications

General

Brand	Atlas
Model	Kwik Bay
Category	Lifting Systems
Language	English