Need help?Do you have a question about the Atlas BP8000 and is the answer not in the manual?
General| Brand | Atlas |
|---|---|
| Model | BP8000 |
| Category | Lifting Systems |
| Language | English |
Key design and operational characteristics of the BP8000 model.
List of tools necessary for the correct installation of the lift.
Defines the essential concrete base requirements for safe installation.
Specifies the electrical power needs and wire gauge for the lift.
Guidance on selecting and preparing a suitable installation site.
Instructions for marking the base plate layout accurately on the floor.
Procedure for verifying all delivered components against the shipment list.
Instructions for placing the two main power side support columns correctly.
Detailed steps for connecting the various cables required for lift operation.
Guidance on aligning and ensuring the vertical plumbness of the columns.
Method for drilling and securely fastening the anchor bolts to the floor.
Procedure for initially raising and securing the carriages onto the primary safety locks.
Steps for properly routing and securing the synchronizing or safety cables.
Instructions for connecting and routing the hydraulic oil hoses.
Steps for mounting the hydraulic power unit and connecting its oil hoses.
Procedures for installing the critical safety mechanisms and associated cables.
Instructions for attaching floor covers and protective rubber components.
Steps for attaching the lifting arms and correctly adjusting their locking mechanisms.
Guidance on wiring and connecting the lift's electrical control system.
Procedure to ensure both carriages lift and lower in unison.
Steps to properly tension and test the safety cable function.
Method for controlling the descent speed of the lift.
Final operational test with a vehicle to confirm all functions.
Comprehensive guide for safely raising a vehicle using the lift.
Comprehensive guide for safely lowering a vehicle from the lift.
List of essential maintenance tasks to be performed on a monthly basis.
List of essential maintenance tasks to be performed every six months.
Catalog of specific parts for oil hoses, fittings, and cables.
Catalog of individual components for the hydraulic cylinders.
Catalog of individual components for the hydraulic power units.
To Next Page
