Need help?Do you have a question about the Atlas 90HSC and is the answer not in the manual?
General| Brand | Atlas |
|---|---|
| Model | 90HSC |
| Category | Lifting Systems |
| Language | English |
Details the concrete requirements, including thickness, strength, and levelness for safe installation.
Specifies the electrical requirements, including voltage, breaker size, and wire gauge for the lift.
Ensure the chosen location has suitable concrete, layout, and space for lift installation.
Position columns, align baseplates, install rubber covers, and check/adjust plumbness with shims.
Mount the power unit and connect the oil hoses, ensuring all fittings are tightened and the reservoir is filled.
Prepare, drill, install, and torque anchor bolts to secure the lift columns to the concrete floor.
Connect power supply, motor wires, and limit switch wires to the AC contactor and control button.
Perform a test run with a load, checking for synchronous operation and bleeding air from the system.
Step-by-step instructions for safely lifting a vehicle, including positioning and securing.
Step-by-step instructions for safely lowering a vehicle after lifting, including disengaging locks.
Lists causes and remedies for issues where the lift motor fails to operate.
Lists causes and remedies for when the motor runs but the lift fails to lift.
Lists causes and remedies for the lift failing to maintain its raised position.
To Next Page
