Instruction manual - GB
www.atmos.cz
GB-11
GB
2. For type
DC75SE
Roof for this boiler type consist of two pieces – see figure (DC75SE – 2 x 500mm)
3. For type
DC18S
DC20GS
DC22SX
DC25GS
DC32GS
DC40GS
DC30SE
The spherical space must be assembled in a way that ensures that the front section of the piece /10/ is
3 cm away from the front edge of the boiler frame.
CAUTION – do not turn the rear face when handling
4. For type
DC15E
10. Heatproof shaped piece
- Spherical space (L+R
side),
14. Heatproof shaped piece
- rear face with a rearward
recess
39. Combustion area
lining (2 x 2 piece)
38. Spherical area
Spherical area /14/ must be
pushed to the rear of combus
-
tion area
To Next Page
Loading...
