18 19
NOTE
If after you have done the procedure outlined above and the neutral pix-
el has not been corrected. Try the process on a pixel directly adjacent to
the neutral pixel in order to make a uniformed correction in the FOV.
SYSTEM SETTINGS
THERMAL
CONTRAST — the dif-
ference in luminance and
color that makes an object
more distinguishable. You
may adjust the setting from
1 to 5, or select Auto.
THERMAL SENSITI-
VITY — Allows you to se-
lect how sensitive the Ther-
mal Sensor is in picking up
thermal heat signatures.
METERING MODE — The Center mode tells the sensor to concentrate on
the heat signature in the center of the field of view and ignoring the back-
ground.
The Matrix mode tells the sensor to look at the heat signature in the entire
field of view and the background to give you a better image of the entire scene.
OK BUTTON NUC — Turning this option ON, will allow you to do a quick
NUC by tapping the OK Button on your control pad.
COLOR PALETTES — The range of colors used for thermal imaging.
PHOTO/VIDEO
MICROPHONE — sound
recording (ON/OFF).
FORMAT SD CARD —
after you choose this sub-
category, you’ll see a pop-
up window asking you
about formatting.
DISPLAY
SCREEN BRIGHT-
NESS. Gives you a 1 to 5
numerical selection, with
1 being the dimmest and
5 the brightest. It is rec-
ommended that you use
the brightest setting during
the day for optimal perfor-
mance.
DISPLAY WIDGETS — allows you to disable several widgets (Minimal/Ex-
tended).
SLEEP MODE
• Sleep Mode — allows you to switch the mode (ON/OFF)
• Hibernation Time — can be 1 – 60 min.
SETTINGS
UNITS — can be Metric
or Standard system.
DATA AND TIME
• Clock Source — al-
lows you to choose dif-
ferent types of source
to improve the accura-
cy (Manual, WiFi).
• Date Format — can be
YYYY-MM-DD, MM-
DD-YYYY, DD-MM-YYYY.
• Time Format — form of stating the time (24-hour or 12-hour).
• Date — enter the date.
• Time — enter the time.
• Time Zone — allows you to choose a geographical region with standard
time.
WIFI AND BLUETOOTH — WiFi values are not changeable.
• Remote controller — Allows for pairing of X-Trac remote.
• Remote Controller Orientation — Allows you to choose the orientation of
the remote, changing the direction of Keypad buttons
.
• Rangefinder mode.
• WiFi info.
• Broadcast LRF.
DEVICE TYPE — to make all features work correctly you need to choose the
type of lens you have.
ZOOM — allows you to choose different types of zoom (Standard, Extend-
ed). Extended Zoom will give an electronic zoom of 10x your optical Zoom.
Example: 4–16 in Extended mode becomes 4–40x. However, we would like
to caution you that you will begin to see considerable pixelation at such a
zoom.
RESTORE FACTORY SETTINGS — allows to reset all the settings to de-
fault.
FIRMWARE VERSION — allows you to see the firmware version currently
running on your binocular.
We recommend that you register your product on our home page (www.at-
ncorp.com) in order to make sure that you are getting emails when new firm-
ware versions become available. We are constantly working on new features,
functions, and improvements that we provide to you free of charge via firm-
ware upgrades.
To Next Page
Loading...
Need help?
General
