8 9
5. IMAGE SETTINGS
You can set palettes, brightness, scenes, FFC/NUC (flat field correction)/
(non-uniform correction), and DPC (defective pixel correction) to display the
best image.
5.1. ADJUST DIOPTER
Make sure the eyepiece covers your eye and aim at the target. Adjust the
diopter adjustment knob until the OSD text or image is clear.
NOTE
When adjusting diopter, DO NOT touch the surface of lens to avoid
smearing the lens.
View the Target
DIOPTER
ADJUSTMENT
KNOB
Adjust Diopter
CABLE
INTERFACE
BATTERY STATUS
INDICATOR
Cable Interface
• Flashing Red & Green: error occurred.
• Solid Red: battery is properly charging.
• Solid Green: battery is fully charged.
• Off: battery is not charged.
4.2. POWER ON/OFF
Power On
When the battery is fully charged, press
for 2 seconds to power on the
device.
Power Off
When the device is turned on, hold
for 2 seconds to power off the device.
4.3. MENU DESCRIPTION
When the device powers on, hold to display the menu.
Press
to move the cursor up.
Press
to move the cursor down.
Press
to confirm and hold it to exit the menu.
To Next Page
Loading...
Need help?
General
