EasyManua.ls Logo

Atomic 3000 LEDSTROBE - User Manual

Default Icon
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
please read this manual before connecting your equipment
ATOMIC 3000 LED STROBE
user manual
Question and Answer IconNeed help?

Do you have a question about the Atomic 3000 LEDSTROBE and is the answer not in the manual?

Summary

Product Description

Product Description

Describes the STROBE3000 RGB LED as a powerful strobe with DMX, manual, and auto modes.

Warranty and Repair

States that internal parts should not be repaired by the user and to contact an authorized dealer for service.

Caution and Security Information

Manufacturer Responsibility

Manufacturer is not responsible for damages from misuse or unauthorized modifications.

Electrical Safety

Secure electrical connections, avoid different voltages or dimmers, and do not operate with damaged cords.

Grounding

Do not remove the ground tip of the power cord to reduce shock/fire risk.

Unit Damage and Cable Safety

Do not operate if damaged; secure cables to prevent damage from people or vehicles.

Service Requirements

Unit needs qualified personnel for damaged cables, falls, or abnormal operation.

Transportation Safety

Transport the equipment in safe conditions to prevent damage.

Warranty Void Conditions

Warranty void if not operated per manual or if damage occurs from short circuits, falls, or abuse.

Prevent Falls

Verify support integrity when hanging devices on assembly, truss, or stands.

Prevention of Concussion

Ensure electrical connection matches characteristics, adequate voltage, and proper grounding.

Prevent Burns or Fire

Maintain distance from flammable material, use correct fuses, avoid looking at the light source, allow cooling, and don't cover unit.

Packing and Transfer

Unpacking Instructions

Check packaging for damage, inspect equipment, and report issues before use.

DMX Operation

Features Menu

Overview of DMX modes, channel modes, test run, and simulate DMX functions.

System Info

Details on DMX value, rest info, and other system information display options.

Display Settings

Controls for light set, light off, menu back, light flash, touch calibration, and exit.

Dimmer Settings

Settings for dimmer mode, SW balance, and color balance adjustments.

3 Channels DMX Mode

Details on channels for beam intensity, flash duration, and flash rate in 3-channel mode.

4 Channels DMX Mode

Details on channels for beam intensity, flash duration, flash rate, and effect in 4-channel mode.

14-Channel DMX Extended Mode

Details on beam intensity, flash duration, rate, effect, and background functions in extended mode.

Extended DMX Channels 1-8

Covers beam intensity, flash duration, rate, effect, background effects, speed, and shutter.

Extended DMX Channels 9-14

Details on shutter background, dimmer, and background colors in extended mode.

Technical Specifications

Light Source and Lifespan

Specifies LED types, quantities, and minimum LED lifetime.

Control Systems and Channels

Details control systems, DMX channels, and setting interface.

Weight and Dimensions

Provides Net Weight (NG) and Gross Weight (GW) per piece.

Control Panel Configuration

DMX Address and Control Mode

Setting DMX address and selecting control modes (3, 4, or 14 channels).

Dimmer Curve Options

Explains different dimmer curve types: linear, square-law, inverse square-law, and S-curve.

Strobe and Cooling Mode Settings

Configuration for strobe type (LED/Xenon) and fan cooling modes.

DMX Reset and Display Modes

Options for DMX reset, sleeping display mode, and error message display.

Art Net DMX and Language Settings

Configuration for Art Net DMX signal reception and user interface language.

Default Settings and System Info

Procedures for factory reset, boot time display, software version, and RDM UID.

DMX LIVE and Test Functions

Live DMX data display, fan speed, temperature, rate, quality, and LED tests.

Handbook Control and Service

Manual control functions, error tables, and fan control options.

DMX Modes

3-DMX Channel Mode Details

Detailed functions and values for beam intensity, duration, and rate in 3-channel mode.

4-DMX Channel Mode Details

Detailed functions and values for beam intensity, duration, rate, and effect in 4-channel mode.

14-DMX Model (Extended) Details

Explains channels for beam intensity, duration, rate, effect, and control/setting functions.

Control;Setting Functions

Details on fixture reset, dimming curves, display settings, and fan speed control.

FX Select and FX Adjustment

Configuration for selecting and adjusting programmed effects.

Aura Control Channels

Detailed control of aura flash/shutter effects, dimming, and RGB color mixing.

Aura Color Presets and Effects

Aura Color Presets 1-14

Lists specific LEE color presets for Aura color mixing.

Aura Color Presets 15-36

Lists specific LEE color presets for Aura color mixing, continuing from page 12.

Aura Color Wheel Rotation Effect

Controls for color wheel rotation effect (clockwise, stop, counter-clockwise).

Aura Random Colors

Settings for random color effects (Fast, Medium, Slow).

Appendix: Preprogrammed Effects

Beam Effect Preprogrammed Effects

Lists DMX values and effects for beam effects like wave, step, pulse, and chases.

Aura Effects Preprogrammed Effects

Lists DMX values and effects for Aura effects like pulse, ramp, RGB wave, and CMY.

Combination Effects Preprogrammed Effects

Lists DMX values and effects for combination effects like thunderstorm, police car, and tick-tock.

Atomic 3000 LEDSTROBE Specifications

General IconGeneral
TypeLED Strobe
Light SourceLED
LED Engine Life50, 000 hours
Color Temperature6500 K
Recycling TimeInstantaneous
Input Voltage100-240 V AC, 50/60 Hz
HousingAluminum
IP RatingIP20
Weight8.5 kg
Control ProtocolDMX, RDM
DMX Channels4