50
GLOBAL SETTINGS CONTINUED...
LEVEL ASSIGN: Chooses which output(s) should be affected by changes of the LEVEL
knob. The options are ALL OUTPUTS, MAINS + PHONES, AUX + PHONES, or PHONES
only.
TAP TEMPO MODE: Selects the mode of operation for the tap tempo switch. The
options are:
GLOBAL: All presets follow the tempo set by the GLOBAL BPM (see below). This
overrides the PRESET BPM while set to global.
PRESET: Each preset ignores the GLOBAL BPM and follows the BPM of the
currently selected preset.
GLOBAL BPM: When TAP TEMPO mode is set to GLOBAL then the GLOBAL BPM is
in effect for all presets. It can be set to a value here and updated via the tap tempo
switch.
MIDI IN (OFF/1-16/OMNI): Selects the MIDI IN channel on which AMPLIFIRE will
listen and respond to incoming MIDI messages. Set to a specific channel (1-16) or set
to OMNI to listen on all channels. See the MIDI section below for more detail.
MIDI OUT (OFF/1-16/OMNI): Selects the MIDI OUT channel on which AMPLIFIRE will
transmit MIDI messages. Set to a specific channel (1-16) or set to OMNI to broadcast
on all channels. See the MIDI section below for more detail.
MIDI THRU (OFF/ON): When MIDI THRU is set to ON the AMPLIFIRE will pass
through all MIDI messages from the MIDI IN to the MIDI OUT. This enables daisy-
chaining multiple MIDI devices together.
MIDI CLOCK (OFF/INPUT/OUPUT): Allows the AMPLIFIRE to transmit or receive a
MIDI CLOCK signal. When set to INPUT the AMPLIFIRE will listen and respond to MIDI
CLOCK messages on MIDI IN and set the BPM accordingly. When set to OUTPUT the
AMPLIFIRE will transmit the current BPM via the MIDI OUT port.
PRESET INDEX: Selects the numbering of the presets:
0-127: Presets are numbered starting from 0 and running up to 127.
1-128: Same presets are numbered starting from 1 and running up to 128.
TUNER SILENT (OFF/ON): Turning this to ON will engage a silent tuning mode
whenever the Tuner is engaged. In this mode, the INPUT is muted. This enables silent
tuning when the Tuner is engaged.
TUNER REF (Hz): Set the reference frequency of Concert A for the tuner. The default
frequency is A440.0Hz.
CONTRAST (1-10): Allows customization of the display contrast. Useful for adjusting
visibility for different viewing angles. Adjust as needed for best readibility.
To Next Page
Loading...
