Atomic AmpliFire - MIDI

55
MIDI
AMPLIFIRE reponds to and transmits MIDI messages to support program changes
and MIDI continuous control changes.
MIDI communicates messages over one of sixteen (16) channels. AMPLIFIRE can
be programmed to send or receive these messages on any one, all, or none of these
channels. These are selected by the MIDI options in the GLOBAL SETTINGS menu.
The MIDI IN CHANNEL global setting selects which MIDI channel AMPLIFIRE will
react to.
• Set the MIDI IN CHANNEL to the desired MIDI channel and AMPLIFIRE will react
to program changes or control changes it receives on the MIDI IN jack on that
channel ONLY.
• Set the MIDI IN CHANNEL to OMNI, and AMPLIFIRE will react to any program
changes or control changes it receives on the MIDI IN jack.
• Set the MIDI IN CHANNEL to NONE, and AMPLIFIRE will ignore all program
changes and control changes it receives on the MIDI IN jack.
The MIDI OUT CHANNEL global setting selects which MIDI channel AMPLIFIRE will
transmit program changes on.
• Set the MIDI OUT CHANNEL to the desired MIDI channel and AMPLIFIRE will
send program changes to the MIDI OUT jack on that channel ONLY.
• Set the MIDI OUT CHANNEL to OMNI, and AMPLIFIRE will send program
changes on the MIDI OUT jack on all channels.
• Set the MIDI OUT CHANNEL to NONE, and AMPLIFIRE will not send any MIDI
program changes to the MIDI OUT jack.
The MIDI THRU global setting allows AMPLIFIRE to relay MIDI messages it receives
on the MIDI IN jack to the MIDI OUT jack. This is useful for MIDI setups where
AMPLIFIRE is part of a chain of MIDI equipment in which only some of the messages
are intended for AMPLIFIRE, and others are intended for other equipment on the
same chain.
• Turn the MIDI THRU global setting to ON to let AMPLIFIRE merge incoming
messages on the MIDI IN jack with outgoing messages to the MIDI OUT jack.
• Turn the MIDI THRU global setting to OFF and AMPLIFIRE will only send its own
program changes to the MIDI OUT jack.
MIDI PROGRAM CHANGES are mapped one-to-one, meaning that AMPLIFIRE will
switch to the same preset as the incoming MIDI program change message. Likewise,
if you change presets in AMPLIFIRE using the ENCODER or FOOTSWITCH, AMPLIFIRE
will transmit the same preset number in the outgoing MIDI program change.
MIDI CONTROL CHANGES are MIDI messages that contain a control number (CC#)
and a data value. AMPLIFIRE allows external control of effects and functions via
programmable MIDI CC table. See the table below for the list of default assignments.
DATA VALUES between 0 and 63 are interpreted as OFF, and DATA VALUES between
64 and 127 are interpreted as ON.