Need help?Do you have a question about the Atonm MDSC-1000B and is the answer not in the manual?
General| Type | Handheld Metal Detector |
|---|---|
| Operating Frequency | 10 kHz |
| Display Type | LCD |
| Sensitivity Adjustment | Yes |
| Operating Temperature | -10°C to 50°C |
| Target Identification | Yes |
Explains the meaning of different indicators shown on the device's LED screen.
Describes the purpose and action of each button on the control panel.
Instructions for physically mounting the main unit of the detector.
Recommendations for positioning and spacing the metal sheet sensors.
Illustrates the standard wiring connections for power and signals.
Details specific wiring configurations for relays and PLCs.
Step-by-step guide to automatically calibrate the detector's sensitivity settings.
Optional advanced setting for improving detection accuracy through learning.
Procedure for fine-tuning single-sheet or double-sheet detection sensitivity manually.
To Next Page