11
Grounding Terminal
AC 110-125 V
Outlet Only
breaker with an efficient earth connection.
Should there not be an electrical safety
feature have this introduced by a qualified
person. by means of a omnipolar switch
as indicated in the safety regulations with
a means of a omnipolar switch as indicated
in the safety regulations with a minimum in the safety regulations with a minimum
clearance of the contacts of 3 mm.
where the cabinet has to be installed at
some distance from the electrical source.
ensure that the conforms to the local
regulations. Cabinet supplled with
integral condensing units are
provided with an appropriate plug fitted
provided with an appropriate plug fitted
with a neutral and earth; the supply
cable must be well stretched (avoid
coilling and superimposition ). it must
not be exposed to the possibility of damage by third parties. it should not
be in contact with liquids, water or heat sources. in the event of damage it
must be replaced by qualified personnel. Always avoid the use of reducers
or adapters.or adapters.
5.4 CONNECTION TO DRAINS
The dispersal of defrost water is automatic in all models with integral
condensing unit.
To Next Page