ATS Systems Ultimate Chuck Installation and Operations Manual
Declaration of knowledge by Personnel (Operator)
It is confirmed herewith that the person of
Mr./Mrs./Miss
being charged by the business operator with
responsibility to operate chucking equipment has
read and understands the operating instructions, in
particular the section on “Precautions”, for the ATS
power chuck.
Operator Date
Business Operator/ Date
Authorized person
SPECIFICATIONS:
2.1 Specifications and dimensions
The following pages in this section include drawings
and specification data sheets for both chuck models
that direct mount to A-type lathe spindle noses, and
models that require an adapter plate between the
chuck and the lathe spindle nose. The data sheets
show all models that are possible, but not all models
are regularly stocked.
To Next Page
Loading...