4
products. There are many specific optical and mechanical custom configurations, and
this manual only introduces its main unit components.
Laser welding is a new welding method and handheld laser welding is more widely in
used. The handheld laser welding head has the advantages of beautiful appearance,
small and light weight, wide use range, simple operation, and fine weld seam, which
greatly improves the welding efficiency and quality. Hand-held laser welding solves the
existing welding problems such as poor welding of corners, insufficient welding, post-
processing of welds, unsightly welds and so on, which makes it the first choice for most
metal welding.
Safety Instructions
Please read the following safety precautions and suggestions carefully before operating
the laser and handheld laser welding head.
1. Please observe all safety instructions for laser (including but not limited to
descriptions of laser and the related chapters in this document)
2. Please ensure that do not look directly at the laser beam at any time or under any
circumstances. Do not look at the laser emitter port directly even if wearing laser
protective goggles.
3. It is forbidden to aim the laser at any human body, animal, vehicle, sky, etc. The
operator shall be legally liable for the (direct, indirect and incidental) injury to the
object, and the company shall not bear any liability and loss.
4. When using laser, wear laser protective goggles of the corresponding wavelength
to protect your eyes from the threat of laser.
5. At any time, please turn on the power of the controller and other control parts
before turning on the power of the laser. Otherwise, it may cause injury by
uncontrollable laser beam.
To Next Page
Loading...