Introduction
Dante mini stereo amplifier
The AMP203 is a revolutionary small amplifier, featuring a Dante audio input over IP
providing a complete media networking solution to distribute uncompressed audio via
standard Ethernet networks with near-zero latency while allowing all other data to be
connected on the same network.
The output connector has been implemented using a 4-pin terminal block connector,
featuring an output power of 30W per channel and 60W when bridged.
Using PoE (Power over Ethernet) the amplifier receives both power and signal through a
single networking cable, this way flexibility is maximized while needed cabling is kept
at a minimum.
The compact convection cooled enclosure eliminates any hum or buzz otherwise caused
by a fan. Various optional mounting brackets are available making it ideal for mounting
under a desk, in a closet or on the wall, 19” rack mounting hardware is available as well.
To Next Page
Loading...
