Need help?Do you have a question about the AUDAC EPA252 and is the answer not in the manual?
General| Frequency Response | 20 Hz - 20 kHz |
|---|---|
| Signal-to-Noise Ratio | > 100 dB |
| Input Sensitivity | 1 V |
| Damping Factor | > 200 |
| Power Output | 2 x 250 W @ 4 Ω |
| Inputs | XLR |
| Outputs | Speakon, Binding Posts |
| Impedance | 4 Ω |
| Power Source | AC 230V, 50/60Hz |
| Input Impedance | 10kΩ |
| Technology | Class-D |
Provides essential safety instructions for handling and operating the unit.
All servicing must be performed by qualified personnel. Do not attempt user repairs.
Explains warning symbols for electrical hazards and user safety precautions.
Description of volume control knobs and indicator LEDs (Signal, Clip, Protect).
Explains the switch for selecting stereo, bridge, and parallel operation modes.
Details merging both output channels for double power to a single load.
Lists output power for EPA152, EPA252, EPA502 at different impedances.
Details frequency response, signal-to-noise ratio, THD, and crosstalk.
Details power consumption in standby, idle, 1/8 rated, and 1/3 rated power modes.
To Next Page
