AUDAC EPA252 - Technical Specifications; RMS Output Power Ratings; Frequency Response and Signal Quality; Input and Output Connector Specifications

14
Chapter 4
Additional information
Technical specifications
RMS Output power EPA152 4 Ohm stereo 2 x 150 W
8 Ohm stereo 2 x 80 W
8 Ohm bridge 1 x 300 W
EPA252 4 Ohm stereo 2 x 250 W
8 Ohm stereo 2 x 130 W
8 Ohm bridge 1 x 500 W
EPA502 4 Ohm stereo 2 x 500 W
8 Ohm stereo 2 x 300 W
8 Ohm bridge 1 x 1000 W
Frequency response 20 Hz - 20 kHz
Signal to Noise ratio > 90 dB
Total Harmonic Distortion + Noise < 0.1%
Crosstalk > 70 dB
Inputs Type Balanced line
Connectors Female XLR
Male XLR linkthrough
Impedance 12 k Ω
Sensitivity 0 dB (1 V RMS)
Outputs Type Loudspeaker output
Connectors Speakon compatible
2-pin terminal block ~ 5.08 mm pitch
Controls Front panel control
Indicators Power (& standby)
Protect
Clip
Signal
Cooling system Convection cooled
Amplifier technology Class-D
Power supply Type Switching mode
Range EPA152 100-240V AC - 50/60 Hz
EPA252 100-240V AC - 50/60 Hz
EPA502 230-240V AC - 50/60 Hz