EasyManua.ls Logo

AUDAC CMP30 - Front Panel Controls - Part 5

AUDAC CMP30
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
Search up (DIR +):
•CD,USB&SD/MMCmode:
Pressthisbuttontojumptoahigherfolder.
•Tunermode:
Press:Pressthisbuttonintunermodetoselectthenextprogrammedradiopreset.
Press&Hold:Bypressingandholdingthisbutton,thecurrentchosenradiofrequencywill
bestoredon‘Position6’oftheselectedband.
Random play (RAND):
•CD,USB&SD/MMCmode:
Pressthisbuttontoswitchtherandomplaymode(Shuffle)OnandOff.Whenrandomplay
isswitchedON,trackswillbeplayedinarandomsequence.
•Tunermode:
Press&Hold:Bypressingandholdingthisbutton,thecurrentchosenradiofrequencywill
bestoredon‘Position4’oftheselectedband.
Memory for the tuner frequency (MEMO):
Whenpressingthisbutton,availableradiostationswillbesearchedandautomatically
storedtothepresetmemory.Theradiostationsarestoredinorderofincreasing
frequency,startingfromBand1-Position1withsubsequentlytheincreasingfrequencies
onthehigherpositions.
Manualpositionassignmentofthepresetfrequenciescanalsobedonebypressingand
holdingthePLAY/PAUSE(1)–STOP(2)–REP(3)–RAND(4)–DIR-(5)–DIR+(6)buttons.
Mute (MUTE):
Bypressingthisbutton,thevariableoutputandfixedCD/MP3outputcanbemuted/
unmuted.Thefixedtuneroutputisnotaffectedbythemutebutton.Whentheoutputsare
muted,themessage‘MUTE’willblinkonthedisplay.
USB connection port & SD/MMC card slot:
AnUSBstoragedeviceand/oranSD/MMCmemorycardcanbeinsertedtotheseslots.
TracksstoredonherecanbeplayedthroughtheCMP30anditwillautomaticallystartto
playwhenthemediumisinserted.
Power switch:
ThedevicecanbeswitchedONandOffusingthepowerswitch.Whenthedevice
isswitchedON,theblueLEDabovethepowerbuttonwillilluminate.Afterpowering
on,ittakesaboutthreesecondsbeforethedevicebeingoperational.Thedevicewill
automaticallyresumetoitspreviousoperationmodeuponpoweron.
Functions overview
TheCMP30containsmanybuttonshavingdifferentfunctionsdependingofthecurrent
operationmodeofthedeviceandthewaytheyareoperated.Forexample,somebuttons
haveadifferentfunctioninCD/MP3modeortunermode,alsodependingiftheyare
pressedforashorttermorpressedandholdforafewseconds.
Belowtablegivesanoverviewforallthedifferentfunctionswhichcanbecontrolled,
indicatingthedifferencesbetweenthedifferentoperationmodes.

Other manuals for AUDAC CMP30