AUDAC CMP30 - Front Panel Controls - Part 2

8
Chapter 2
Front & rear panel
Front panel description
Function rotary dial (FUNCTION):
ThefunctionrotarydialallowstoswitchthedevicebetweenTuner,CDorUSB&SD/MMC
operationmodebypressingashortterm.Itwillswitchbetweentheseveralmodesinthis
sequence.Byrotatingthisdial,theoutputvolumeforthe‘Variableaudiooutput’canbe
adjusted.
Bypressingandholdingthisbutton,theplaybackmodewillbeswitchedbetween‘Single
Play’and‘Normal Play’mode.In‘Normalplay’mode,thenexttrackwillautomatically
startplayingwhenthecurrenttrackisfinished.In‘Singleplay’mode,theplayerwillfall
intostopmodeafterthecurrenttrackbeingfinished,waitingfora‘Play’command(press
thePlaybutton)beforeplayingthenexttrack.Insituationswherethedeviceisusedfor
music,usuallythe‘NormalPlay’modewillbedesirable,whileinothersituationssuchas
educationalpurposes,housesofworshipsorgym’sthe‘SinglePlay’modecanprovide
greatuserconvenience.
LCD Display:
TheLCDDisplayshowsthecurrentoperationmodeoftheunit.Itshowswhichradio
stationisplaying,whichaudiotrackisplaying,whichfunctionsareenabled,…
CD Slot:
AudioCD’sshallbeinsertedintothisdrive.ThedrivewillloadtheCDautomaticallywhen
itisinsertedintothisslot.OnlyuseCD’swithnormalroundshapeandwithnormalsize
(12cm).AlwayscheckiftheCDslotisemptybeforeinsertingaCDanddon’tforcethe
CDintotheslotwhenitdoesn’taccepttheCDautomatically.WhenaCDisinserted,the
devicewillautomaticallystartplayingit.
CD Eject button (EJECT):
ThisbuttonshallbepressedtoremovetheCDfromthedrive.Afterthisbuttonbeing
pressed,theCDwillbeejectedfromthedriveandcanbetakenoutbytheuser.IftheCD
isnottakenwithin~10seconds,theCDwillbeautomaticallyinsertedtothedriveagain.
Front Panel overview