ITEM: AOIND
3 Quick Start Guide
3.1 Charging & Powering ON
Connect the Micro USB cable (only use the provided cable)
to a computer USB port or a USB wall charger. Plug the
other end of the micro USB cable into the Micro USB
charging port (G) located on the left side of the headphone.
While charging the LED indicator light (E) will turn RED and
then turn BLUE when the battery is fully charged.
Ensure the Headphones are turned o, then slide the power
switch to turn the Headphones ON. The Headphones will
enter Bluetooth pairing mode automatically and emit a tone
as the LED indicator light (E) will flash BLUE and RED.
NOTE: please refer to the diagram on 2.2
1 21
1
2
To Next Page
Loading...
