– Secure the retrofit wiring harness using the cable ties provi-
ded, to prevent noise and abrasion.
– Re-install all removed parts.
– Where necessary, paint the inside of the exhaust tips with
matt black paint.
Note
The genuine AUDI replacement exhaust system holds ECE
type approval (E24 031446). It is therefore not necessary to car
-
ry any additional documents with the system, or enter informa-
tion in the vehicle registration certificate.
Installation instructions - Audi A4/A5 (B8 series) 2008 ▶
Edition 1
1/2012
3 Sequence of operations
17
To Next Page
Loading...