Clock Settings: MMI
®
1. Press the function button.
2. Press the Time control button.
3. Using the control knob, scroll to Time source.
4. Make sure the Time source is set to GPS.
5. Ensure time zone is accurate for your location.
To set time with GPS
*
:
*Vehicles equipped with Navigation only.
NOTE: Turn on Daylight Savings time to allow the clock to change automatically.
TEXT A7CLOCK to 38981
Do not text and drive. Message and data rates may apply.
31
MENU
1. Refer to Set Time with GPS and follow Steps 1 - 3.
2. Rotate the knob to Manual and select.
3. Turn the knob until you reach Time; select to activate.
4. Turn the knob to the desired hour and press to set.
5. The minute display is now highlighted; repeat the selection process.
6. Save the time by pressing the control knob.
To manually adjust the time:
Vehicle should be stationary with the parking brake engaged before performing these operations.
32
Clock Setting