Audi Q5 2009 - Climate Control and Sunroof; Automatic Climate Control Operation; Panoramic Sliding Sunroof Operation

Audi Q5 2009 
No. 66, Body, Edition 11.08
3 Partition grid assembly set
6
6
– Screw the partition grid -1- and the upper brackets -9-
together loosely using the star grip screws (small head) -2-.
Vehicles without a rack system for loading safety (fixed
fastening rings)
– Lift the fastening ring -A- and insert the bracket -6-.
– Screw the bracket -6- to the partition grid with the star grip
screws (small heads) -2-.
– Straighten the partition grid centrally again and tighten all
of the screws securely.
Vehicles with a rack system for loading safety (adjustable
fastening rings)
– Screw the bracket -4- and the counterhold bracket -5-
together loosely using just one of the star grip screws
(large head) -3- for each.
Ensure that the cut outs and the guides -Arrow- on the
counterhold bracket -5- face towards the bracket -4-
(the narrow end facing up).
– Remove all existing fastening rings from the rails.
ZUB-0099
1
2
9
ZUB-0100
6
A
ZUB-0101
6
2
ZUB-0102
5
34
Note