EasyManua.ls Logo

Audi Q7 2014 - Page 120

Audi Q7 2014
340 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
118 Adaptive cruise control
Turning adaptive cruise control off
temporarily
Applies to vehicles: with adaptive cruise cont rol
In some situations it makes sense to turn
adaptive cruise control off temporarily.
®
Fig. 131 Control lever : Turning adapt ive cruise co ntro l
off tempo rarily
Fig. 132 Display in the speedomete r
Turning control off temporarily
" To shut off the control with the save func-
t ion, either depress the brake pedal, or
" Press the lever in the direction of the arrow
@ q fig . 131 .
How is the distance (time interval) set?
Applies to vehicles: with adaptive cruise control
Distance can be set in four stages.
Fig. 133 Control lever: Set tin g distance
Reactivating control
" To resume the speed and distance control,
release the brake pedal and press the lever
in the direction of the arrow @ .
Display in the speedometer
@ Current vehicle speed ~ fig. 132
@ Saved speed
As long as a speed is saved the set desired
speed will be displayed in the LED display in
the speedometer by one or two illuminated
red light diodes . When the control function is
resumed the adaptive cruise control acceler -
ates to reach the desired speed if no slower
vehicle ahead is detected.
&_ WARNING
Improper use of the adaptive cruise con-
trol can cause collisions, oth er accidents
and serious personal injuries.
- Never resume the stored speed if the
speed is too high for prevailing road,
traffic or weather conditions .
(0 Tips
When the system is turned off temporari-
ly, the speed set at that time is stored.
Increasing distance
-
" Push the slider switch once to the right 0
q fig. 133 . The distance current ly set is
shown for 3 seconds in the instrument clus-
ter display.
" Push the slider switch
again to the right 0
to increase the distance by one step. ..,.

Table of Contents

Related product manuals