26 Dr iv er in f ormation d is play
• To d isplay trip information within a memory
level, press the top or bottom part of the
function selection switch @.
The trip computer will not operate unless the
ignition is on. When you turn on the ignition,
the function that was in use when you last
turned the ignit ion off will be d isp layed.
In addition to information on the trip comput-
e r (trip computer 1, 2 and efficiency pro-
gram*), the digital speedometer and informa-
tion regard ing the navigat ion system* can al-
so be displayed. To switc h the display between
the different information, tap the
I RESET I but-
ton @ briefly .
Setting value s t o zero
To erase the single or total trip comp uter val-
ues, se lect the des ired funct ion and press and
hold the I RESET ! button @ for at least one
second . You can also erase* the values with
the MMI ¢ page 26 .
All values currently displayed in the efficiency
program* are also erased with the single tr ip
computer .
(D Tips
All stored values will be lost if the vehicle
battery is disconnected.
MMI settings
Basic settings for the trip computer can be
made in the MMI.
• Select : I CAR ! function button > Systems *
control button > Inst rument cluster > On·
board computer 1 or On-boa rd computer 2 .
The values in the single -t rip or the total -trip
memory can a ll be reset to zero at the same
time under Reset in the menu .
In addition, you can de t ermine what informa-
tion from the trip computer sho uld be shown
in the instrument cluster display. If one of the
pieces of dr iver information is turned
Off , that
driver information will not be shown in the
display. The information will con t inue to be
calculated by the tr ip comp ute r and can be
turned back
On at any time .
(D Tips
- This function is not available on all
vehicles .
- The d riving info rmation in the eff iciency
program * is also reset to zero with the
sing le-trip memory.
Efficiency program
Description
Applies to vehicles: with efficiency program
Fig. 19 Display: efficiency program
• Press the I RESE T ! button @ ¢ page 25 ,
fig . 18
repeatedly unt il the effic iency pro-
gram appears in the display .
The efficiency program ca n he lp you to use
less fuel. It evaluates driving info rmation in
reference to fuel consumption and shows ot h-
er equipment influencing consumption. Fuel
economy messages
¢ page 27 provide t ips
for effic ient d riving.
The efficiency program uses distance and con-
sumption data from trip computer
l. If the
data are deleted in the efficiency program,
those values a re also reset in tr ip comp ute r
l.
To Next Page
Loading...
