EasyManua.ls Logo

Audi Q7 2014 - Audi Braking Guard

Audi Q7 2014
340 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Audi braking guard
Description
Applies to vehicles: with adaptive cruise control
Audi braking guard warns you of a possible
collision with a moving vehicle up ahead .
Fig. 146 Display in the instrument cluster
The Audi braking guard is active from a speed
of approx. 20 mph (30 km/h) and wor ks with-
in the system limits ¢
page 125 even when
the adaptive cruise contro l is deactivated.
A radar sensor is built into the front of the ve-
hicle
¢page 114, fig. 127. The system is in-
tended to measure the distance to reflective
surfaces . If a measurement is not possible,
the system does not respond.
When the measurement has been taken, the
system can recognize a possibly hazardous sit-
uation, for example, whe n a vehicle up ahead
in your lane of trave l sudden ly brakes or when
your own vehicle is moving at high speed to-
wards a much slower vehicle up ahead . As
soon as the system senses that a possible col-
lision with the vehicle up ahead can only be
avoided by immed iate full brake appli cation or
by an avoidance maneuver, a warning appears.
The system has a defau lt response time to be
able to signal before a collision occurs. This
system response time is automat ically re-
duced if you accelerate actively, fo r example
to join a highway . Braking, transverse acceler-
ation and the steering angle can lead to a re-
duced system response time. The warning is
deactivated if you begin to overtake with full
acceleration .
Adaptive cruise control 127
The system can make you aware of two differ-
ent hazardous situations:
Distance
The distance warning is given if the system
calculates that there is not enough distance
to the vehicle up ahead a period of more than
S seconds. If the distance is less than 30 f eet
(9 meters) at SO mph (80 km/h), for examp le,
an optical display comes on in the instrument
cluster¢ fig. 146.
If the vehicle ahead brakes sharp ly, Audi brak-
ing guard cannot help you to avoid a collision,
even in the case of an immediate response.
Take immed iate action to avoid the collision
and increase the distance to the vehicle up
ahead.
Speed
If there is a much slower vehicle moving up
ahead in your lane, or if the vehicle ahead
brakes sharply, the Audi braking guard calcu-
lates the point from which a collision can only
be avoided by full braking or by an avoidance
maneuver. If a warning does sound, a possible
collision with the vehicle in front can only be
avoided through an evasive maneuver or by
braking.
The warning is given in two stages :
- Pre-warning: A visual display appears in the
instrument cluster and a warning tone
sounds.
- Acute warning: If you do not respond to the
pre-warn ing, the second stage warning is
given. A quick brake application helps to di-
rect your attention to the road and traffic
situation.
Under heavy braking, the brake assistant
¢
page 114 also helps you benef it from maxi-
mum braking efficiency.
A WARNING
Inatt ention can cause collisions, other ac-
cidents and serious personal inj uries.

Table of Contents

Related product manuals