EasyManua.ls Logo

Audi Q7 2014 - Page 182

Audi Q7 2014
340 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
180 Safety belts
Insert the tongue into the correct buckle of
your sea t until you hear it latch securely
¢ page 178, fig. 202.
•Pullon the belt to make sure that it is se -
curely latched in the buckle .
A WARNING
Improperly positioned safety belts can
cause serious personal injury in an acci-
dent.
- Expectant mothers must always wear the
lap portion of the safety belt as low as
possible across the pelvis and below the
rounding of the abdomen.
- Always read and heed all WARNINGS and
other important informat ion¢ .&.
in Fas-
tening safety belts on page 178.
Unfastening safety belt s
Unbuckle the safety belt with the red release
button only after the vehicle has stopped .
Fig. 205 Releasing the tongue fr om th e buckle
Push the red release button on the buckle
¢
fig. 205 . The belt tongue will spring out
of the buckle
c:> ,& .
Let the belt wind up on the retractor as you
guide the belt tongue to its stowed position.
On vehicles with
third row seat*: an unfas-
tened safety belt can be secured in the retain-
ing clip in the luggage compartment side
tr im . In this way, the luggage compartment
cover can be removed without obstruction . Al-
so, the belt tongue height can be adjusted so
that luggage compartment can be loaded
without obstruction with the backrest folded
forward .
A WARNING
-
Never unfasten safety belt while the vehi-
cle is moving . Doing so will increase your
risk of being injured or killed.
Adjusting safety belt height
With the aid of the safety belt height adjust-
ment, the three point safety belt strap rout-
ing can be fitted to the shoulder area, accord-
ing to body size.
Fig. 206 Safety belt height adju stm ent- loop-around
f itt ings
The shoulder belt should lie as close to t he
center of the collar bone as possible and
should fit well on the body ¢ .&.
in Safety belt
position on page 179.
Push
the loop-around fittings up c:> fig. 206
@ ,or
squeeze together the (D button, and push
the loop-around fittings down @ .
Pull the be lt to make sure that the upper at-
tachment is properly engaged .
A WARNING
Always read and heed all WARNINGS and
other important information ¢
page 177 .
(D Tips
With the front seats, the he ight adjust-
ment of the seat can also be used to adjust
the position of the safety belts.

Table of Contents

Related product manuals