Audi RS 3 LMS SEQ - Page 26

26
Two connectors are available connected to the dash logger.
Auxiliary analogic sensors
Matching connector
191 972 713
Pin-out
Terminal
1
5v
FS 2,8 x 0,8
2
signal
FS 2,8 x 0,8
3
GND
FS 2,8 x 0,8
#3: Additional power supply
It can be used for any requirement.
Additional power supply
Matching connector
191 972 714
Pin-out
Terminal
1
+30 up to 8A
FS 2,8 x 0,8
2
+15 up to 5A
FS 2,8 x 0,8
3
GND
FS 2,8 x 0,8
4
GND
FS 2,8 x 0,8
#4 and #5: Radio and drink
Behind the driver seat there are two free connectors associated with the steering wheel module. Connecting
here radio and drinking systems, both can be used through the steering wheel module.
Radio connector
Matching connector
AMP Super-seal 4-way 282106-1
Pin-out
Terminal
1
PTT
183024-1 or 183036-1
2
PTT
183024-1 or 183036-1
3
+30 up to 8A
183024-1 or 183036-1
4
GND
183024-1 or 183036-1
Drink connector
Matching connector
AMP Super-seal 2-way 282104-1
Pin-out
Terminal
1
up to 2.5A
183036-1
2
GND
183036-1
#6: Power supply cut
There is a fusebox power supply connector, so in case of
disconnection cuts all devices power supply.
You can unplug it in case of transport or for a more safe disconnection
in case of workshop big jobs.
See connector placement above the fusebox main connectors on the
picture beside.
Free connectors on the engine bay
4
1
5
6